Home > News

What Should You Pay Attention To When Using A Powerful Magnet?

Nov. 23, 2019

Magnets are more common in the life of the calendar. There are many types of magnets on the market, such as Neodymium Magnets, ferrites, aluminum-nickel-cobalt, samarium-cobalt, etc. These are the types of magnets that exist on the market, and the existence is certainly justified. Nowadays, the price/performance ratio of the powerful magnet is relatively good, and it is still a kind of magnet which is widely used in practice. So what should you pay attention to when using a powerful magnet? The Precast Concrete Magnet supplier below will tell you.

Neodymium Magnets

Neodymium Magnets

1. Operating Environment First of all, when using a powerful magnet, care should be taken to ensure the environment around the magnet. Today, the powerful magnet is still very promising in the market and is widely used. When the magnet is working, the magnetic material should be neat and clean, and the local strong magnet in the environment is relatively incapable of normal operation. Because it is still not able to absorb the iron chips or micro-sized particles, if the working environment is poor, the magnet will simply lose the magnetism, resulting in shortened service life, so the cleaning of the working environment is strong. A major requirement for magnets.

2. Indoor environment 

This is another major point. Under normal circumstances, when preserving a strong magnet, pay attention to the indoor environment, ensure that the air in the room is dredged, and you can't choose a wet local storage, you must choose a boring environment. Powerful magnets are not only requested in the working environment, but also in the indoor environment. Its indoor ambient temperature cannot exceed the working temperature of the magnet, and the products that are not plated can be properly oiled and then rust-proofed. Separate some sensitive magnets when registering the magnets. And the environment that is hosted is to be in compliance with the regulations.

This is the question that needs to be noticed in the process of using a powerful magnet. It is a question of the environment. Just make sure that the environment is neat and appropriate.

In addition, when a manufacturer uses a strong magnet such as a neodymium-iron-boron magnet, it is possible to keep a strong neodymium-iron-boron magnet, so that the bulk purchase price will be relatively cheap. Then there will be a problem, how to save the neodymium iron boron magnet? The Magnetic Chamfer Strip supplier will next tell you how to save the strong neodymium iron boron magnet.

1, neodymium iron boron magnetic material is hard, brittle, and strong magnetic field. It should be lightly handled (especially large size and thin sheet). When the strong magnet itself or other irons are attracted or separated, be careful not to impact. Doing so may cause damage to the magnet or pinching your finger due to a collision.

2, because NdFeB is a multi-metal alloy material with a density of 7.45, it has heavy and brittle properties. Therefore, be careful when handling and moving, so as not to break the magnetic.

3, should also keep the environment dry during storage, do not stack directly on the ground, padded cardboard or placed on the shelf.

4, if the vertical magnet is used, it is not only difficult to remove, but also easily causes the magnet to collide and break. The correct way: gently open to the side, and should be slowly slipped from the outside to the inside.

5, the temperature of the warehouse should not exceed 80 degrees, because exceeding this temperature will cause loss of magnetic properties.

The above is the problem that the strong magnet supplier should pay attention to when using it. Have you learned it?

contact us